Ping's G440 K just got two major conversions | Tour Report

Ping's new G440 K driver got two major conversions at the WM Phoenix Open.

Jack Hirsh/GOLF, Johnny Wunder/GOLF and Getty Images
Ben Griffin and Viktor Hovland are the biggest names yet to put in the G440 K.Jack Hirsh/GOLF, Johnny Wunder/GOLF and Getty Images

Welcome to GOLF’s Fully Equipped’s weekly Tour equipment report. Each Friday of PGA Tour weeks (plus other times, if news warrants), GOLF equipment editor Jack Hirsh will run you through some of the biggest news surrounding golf clubs on Tour, including changes, tweaks and launches.

SCOTTSDALE, Ariz. — Ping’s G440 K just earned perhaps its toughest conversion yet.

Viktor Hovland has a boatload of golf clubs still in his bag from 2019-2020, the years of his first two wins on the PGA Tour. But he has one less this week as his venerable G425 LST driver took a back seat to Ping’s new G440 K driver.

Hovland is a notoriously hard switcher when it comes to his gear, still playing Ping’s i210 irons and a Ping Glide 2.0 60˚ wedge. When it comes to the driver, he’s been close to switching to one of Ping’s new G440 line of drivers before. He made a surprise switch to G440 LST at the Masters last year before returning to the 425 before his next event.

But he was really impressed with the new 440 K in his initial testing.

“The spin consistency off the face is a joke,” he said on Tuesday. “If I hit it off the heel or the toe with a 425, the spin discrepancy is very large. Like if I hit it off the toe, I can spin it under 2000. If I hit it off the heel, I can maybe get up to 3000. Versus the 440, it’s very tight. It goes from maybe 2000 to 2600, so a huge gap. And it’s also faster.

“However, the problem is it launches a little bit higher for me. And for some reason, just with the setup that I’ve tested with, it tends to go a bit more to the right. Right now, with my golf swing, when I get stuck, my miss is already a high-right miss.”

Hovland would have been content to stick with the G425 this week, had it not been for poor performance off the tee on Monday, leading to an evening text to Ping Tour Rep Kenton Oates.

“Monday night, he wanted to try some shorter drivers, 45 inches,” Oates told GOLF. “And I was like, ‘Well, this is a perfect time to keep trying the K because the shorter length will take off some height and should help reduce the right miss.”

PING G440 K Custom Driver

PING G440 K Custom Driver

View Product

ALSO AVAILABLE AT:PGA Tour Superstore

What’s interesting is that the unique properties of the K driver, a large profile driver with an extremely deep and low CG, should help players square the club face. In early testing, it didn’t go as far right as the 440 LST did, but it was still far enough right for Hovland to start the season in Dubai with his trusty G425.

But this week, Oates decided not only to have Hovland test the K with a shorter build, but also with a different shaft, the Mitsubishi Whiteboard 73 TX.

“The one thing that we’ve always noticed and seen is very good start line tendencies. It’ll start where you’re swinging it and kind of just stay with you really well,” Oates said. “That WB did exactly kind of what Viktor needs this K to do: go a little bit lower and go a little bit more left.”

That was the final build Hovland went with. Despite the .75″ shorter shaft than his previous driver, Hovland was still retaining a 173-175 mph ball speed with more consistentcy and hitting his optimal 9˚-10˚ launch window with 2300 rpm of spin.

If you look closely at the shaft, you’ll see the shaft graphics are actually facing up, the opposite side on what they previously are. That’s because the shaft was actually built earlier this week for Ben Griffin, who also tested it in a G440 K.

Mitsubishi Chemical Diamana WB Wood Shaft

Mitsubishi Chemical Diamana WB Wood Shaft

  The board is back. After a few years away, the vintage surfboard always associated with Diamana™ makes its return with Diamana WB. Built on an extraordinarily popular and tour-proven platform, WB brings classic low-low performance and the legendary stability and control you’ve come to expect after two decades. The first in the 6th Generation Diamana™ family, WB is designed with all the traditional branding that made Diamana™ so beloved, including flowers in the handle section, a surfboard behind the Diamana logo, and return to the original 53/63/73/83 weight class designations. But rest assured, the only thing throwback about Diamana™ WB is its appearance. Indeed, super high-modulus 80-ton Dialead Pitch Fiber is used in the butt section to deliver maximum stability and increased energy transfer and high modulus 46-ton fiber is used in the shaft’s angle plies to reduce torque without increasing weight for improved control and stability. Carbon fiber orientation at the tip section is optimized to further lower torque. The classic feel of this Diamana™ profile is achieved through the use of our proprietary Xlink Tech™ Resin System and MR70 technologies. Our Xlink Tech™ Resin System increases the strength and durability of the shaft while driving carbon fiber volume up for better feel. Feel and strength is further increased through the use of our aerospace-grade MR70 fiber – our strongest fiber to date.
View Product

“The shaft that Victor’s played for 5 years was a James Hahn backup driver because Hovland broke his driver in Mexico,” Oates joked. “So maybe that’s our key to getting Viktor into new product is just build stuff for other players and then work for him.”

Griffin plays his drivers at 44.75″ and neutral but Hovland uses his driver Ping’s flat setting, the opposite side of the adaptor. So the shaft ended up at 45″ when installed in Hovland’s preferred setting.

Griffin also ended up making the move to the 440 K from his G430 Max 10K this week because he was actually seeing the driver reduce his miss.

Ping built him several drivers to test at home while he took last week off but he didn’t end up trying them until he got to TPC Scottsdale on Monday. During a Monday afternoon session, Griffin dialed in both a 440 K build and new 430 Max 10K build that could potentially go in, but after playing with it during the week, Griffin went with the new K and his gamer UST Lin-Q Powercore White 7TX shaft.

The three-time winner in 2025 is also using a new Maxfli Tour X-LS golf ball, which he said allows him to swing hard at the ball with his driver and not worry about the ball spinning too much.

“I’m a pretty high ball flight player. I’m able to put a lot of spin on the ball,” Griffin told GOLF this week. “So this new golf ball that’s come out, the Tour X-LS, is able to keep the same profile ball that I’m playing, yet knock down the spin numbers a little bit and knock down the trajectory height for me and it’s going to be a perfect golf ball.”

Last week, Cam Young did something very strange with his bag.

Young, who had been playing a GT2 hybrid, switched to to a 20-degree GT1 hybrid with a Mitsubishi Diamana PD 80TX fairway wood shaft last week for Torrey Pines’ deep rough. It’s stayed in his bag for this week at TPC Scottsdale too. Tom Kim is doing the same with one in a hybrid shaft.

The GT1 is a unique club in the Titleist lineup with an oversized, almost fairway wood-like profile and the unique ability to accept both fairway wood and hybrid shafts. Unlike the other two GT hybrids which have left-to-right CG adjustability, the GT1 has fore-and-aft adjustability.

While the GT1 fairway wood, with a large and shallow profile, has gained traction on the PGA Tour, Titleist Senior Director of Player Promotions JJ Van Wezenbeeck said last week at Torrey Pines offered an opportunity to reintroduce the GT1 hybrid to players looking for versatility.

“When we look at GT1, we’re not looking at it solely for slower speed players,” Van Wezenbeeck told GOLF. “We’re looking for trajectory reasons. This is an opportunity for us to do kind of these unique builds on this in-between club.”

The GT1 has a sharp leading edge that allows it to sit close to the turf, making it easy to launch. That high ball flight was great for the rough at Torrey Pines or the firm desert greens this week at TPC Scottsdale.

Titleist GT1 Custom Hybrid

Titleist GT1 Custom Hybrid

View Product

ALSO AVAILABLEAT: PGA Tour Superstore, Titleist

But it’s the ability of the GT1 to take a fairway wood shaft, which will play softer than a larger tip diameter hybrid shaft, that makes the club so versitile for fitting.

“For Cam Young, we were trying to create more of a 5-wood type golf club, so we were able to build it with a 5-wood shaft and use a .335 tip on the interior diameter, but a hybrid outside diameter [on the hosel]. We get kind of the best of both,” Van Wezenbeeck said.

Big Tone goes low torque

Tony Finau made an under-the-radar switch to a new Ping Scottsdale Tec Ally Blue Onset putter last week during his T11 finish at the Farmers Insurance Open.

Finau hasn’t gained strokes putting for a PGA Tour season since 2022 and had lost more than a stroke in each of the first two events of the season. So he showed up at Torrey Pines looking to try a mallet from his PLD Milled Anser 2D.

This isn’t the first time Finau has used a mallet as he tried an PLD Milled Ally Blue Onset previously at last summer’s FedEx St. Jude Championship.

Ping Tour rep Dylan Goodwin told GOLF they started with the new and unreleased Scottsdale Tec mallet putters since they just arrived on Tour at the end of last season at the RSM Classic.

“Tony gravitated towards the Ally Blue Onset again and the Ketsch 4, which has a hosel he had used in the past on a blade putter,” Goodwin said. “After going back and forth between the putters, the Ally Blue Onset ultimately matched better to his stroke and delivered the face at impact more consistently. As a result, his start line improved, and he liked the contrast between the white finish of the head and the black sight line, which he found easier to line up with.”

While the Scottsdale Tec version and the PLD Milled version of the Ally Blue Onset are the same shape, they have different optics, alignment features and perhaps most importantly, feels. This new Scottsdale Tec marks the first time Finau hasn’t used a milled putter face.

PING 2025 PLD Milled SE Ally Blue Onset Custom Putter

PING 2025 PLD Milled SE Ally Blue Onset Custom Putter

The Ping PLD Ally Blue Onset delivers Tour-proven performance with a design that feels natural in the hands of traditionalists. Played on Tour by Corey Conners, this 360-gram putter combines a 304 stainless steel sole plate with a 6061 aluminum top plate, creating a high-MOI profile without the excess weight of oversized mallets. Unlike trend-driven zero torque or toe-up putters, the Ally Blue Onset features a 15° toe hang, giving golfers a familiar feel with just the right amount of arc in the stroke. This balance helps reduce common pull-side misses while maintaining stability and consistency on the greens. TECHNOLOGY  Machined 6061 aluminum top with 304 stainless steel sole plate 15° toe down to achieve a slight arc Deep milled for slightly softer feel Single alignment line Black anodized finish Onset shaft to help alignment
View Product

However, the putters sounded the same to him, so he didn’t mind the softer feel of the insert.

In his opening round Thursday, Finau gained .611 strokes on the greens, despite shooting a two-over 73.

Check this out

This section is dedicated to one cool photo we’ve snapped recently on Tour, but haven’t had a reason to share yet. For this week, check out Tony Finau’s Nike Vapor Fly Pro 3-iron.

Tony Finau's 3-iron.
Brooks Koepka isn’t the only player with this club still in the bag.Jack Hirsh/GOLF

Odds and Ends

Some other gear changes and notes we’re tracking this week.

Brooks Koepka led all gear news this week with his switch to a TaylorMade Spider Tour X L-neck putter. He missed the cut and lost more than 3.3 strokes putting. He did improve to gain nearly .3 strokes putting in the second round … Collin Morikawa also changed to a Spider Tour X, but with a flow neck … Jordan Spieth switched to the new Titleist SM11 wedgesand a GT2 hybrid, replacing his longtime TSi2 … Marco Penge moved back to a Scotty Cameron Newport Tour Prototype and switched to SM11s … Sam Burns also added SM11s along with Tony Finau (just 60), Michael Kim, Bud Cauley, and Eric Cole … Aldrich Potgieter traded his Scotty Cameron 009M gamer for a new Fastback 2 Tour prototype … Chris Kirk added a Quantum Triple Diamond, keeping up momentum for Callaway staff conversions … Justin Rose’s putter last week at the Farmers was actually a backup after his gamer was damaged beyond repair.

3 things you should read/watch

A selection of GOLF content from the past week that may interest you.

Here’s why we’re ‘testing’ golf clubs differently this year | Fully Fit 2026 – Johnny Wunder introduces you to Fully Fit 2026, our new hope for all of our 2026 golf club review coverage and why we’re changing things up.

TaylorMade’s 2026 TP5, TP5x golf balls show why paint matters – TaylorMade launched their new TP5 and TP5x golf balls which feature a new microcoating technique aimed at making each golf ball fly exactly the same as the last.

TaylorMade 2026 TP5 Golf Balls

TaylorMade 2026 TP5 Golf Balls

The best players in the world, like 2025 champion in Augusta and career Grand Slam winner Rory McIlroy and Collin Morikawa have already made the switch to the fastest ever TP5. It’s time for you to make the switch, too. Microcoating No two golf balls are the same, but the all-new TP5 sets out to solve an invisible problem through our revolutionary microcoating finish process. Uneven paint and excess pooling in the dimples can compromise distance and accuracy. Microcoating uses precision application technology to ensure uniform coverage across the ball’s entire surface. Click on the video for a deep dive. Thinner Than a Human Hair Microcoating is thinner than a human hair and delivers measurable performance advantages: more consistent ball flight, optimized distance, and tight left-to-right dispersion. The Fastest TP5 Ever  TP5 has long been our softest five-layer Tour ball, but now it’s faster than ever. Employing our largest Tour core to date, the TP5 retains more energy at impact, which results in faster ball speeds and more distance at the top of your bag. Tour Flight The reengineered Tour Flight Dimple Pattern features new dimples that when combined with microcoating, promote a more predictable, penetrating ball flight with optimized peak height performance and increased accuracy.
View Product

6 full-bag club fittings with 6 different clubmakers?! Here’s how that went | Fully Fit 2026 – Take a peek behind the curtain of Fully Fit 2026 and see what the greatest golf gear nerd trip ever was really like.

The author welcomes your comments at [email protected].

Want to overhaul your bag in 2026? Find a club-fitting location near you at True Spec Golf.

The post Ping’s G440 K just got two major conversions | Tour Report appeared first on Golf.

Category: General Sports